Kinetico Water Systems Premier Compact HE INT Installation Et Guide D'utilisation page 12

12
8
Run drain line:
a:
Run a drain line to a
discharge point, checking for
any obstructions or possible
kinks.
FOLLOW LOCAL PLUMBING
CODES.
✗
b:
Before connecting the drain line
to the unit, slide on the stainless
steel jubilee clip.
c:
Push the drain line onto the
barbed fitting and tighten the
jubilee clip securely.
Please note:
Drain lines must not run more than
2.4m up or exceed a total of 9m. The
drain line must not be restricted or
kinked.
Kinetico Premier Compact Water Softener Installation and User Manual
Review
1
Pressure:
If a pressure regulating valve
has been fitted, ensure it has been
correctly set to 6 bar.
2
Drain line:
Ensure the drain line is securely
attached, has no restrictions or kinks,
uses an airgap and is fully compliant.
3
Overflow:
Ensure the overflow has no kinks, is
securely attached and that water is
able to fall away with gravity.
4
Inlet/Outlet connections:
Ensure the hoses/plumbing are
attached securely, using the washers
provided, and are firmly held in place
using the retaining bracket and pin.
5
By-pass assembly:
Ensure the assembly is in the
"by-pass" position.
By-pass Position In Service Position