Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
TROUBLESHOOTING GUIDE: Possible operational
problems
PROBLEM
After turning on the
electric blanket, it
does not warm up or
only heats up a little.
After a certain
operation time,
the product
temperature
seems to reduce.
The regulator control
does not turn on
when the switch is
activated.
PRODUCT DISPOSAL AND CONSERVATION
PRODUCT CONSERVATION
Unplug the product when you do not intend
to use it for an extended period of time to
prolong its shelf-life. Prior to storing the
product, allow it to cool down before folding,
keep it in its original packaging in a dry loca-
tion with the fewest possible folds, without
placing any objects on top.
PRODUCT CLEANING
The product has a removable connection.
Always unplug the plug from the socket and remove the product
from the control connection prior to cleaning the product (
12
RECOMMENDATION
Make sure that the regulator is properly
connected to the product.
If the electric blanket is not heating up,
cover it with a bed cover, or duvet , placing
the regulator in the maximum position
and wait for 30 minutes. If it continues
to not heat up after this time, contact an
authorized service technician.
Checks carried out with the electric
blanket partially uncovered or in the open
air are not reliable, as these may result in
erroneous perceptions of the heat.
The product has an auto-stop system that
activates after 90 minutes of continuous
operation. After this time, the light on the
regulator starts to flash.
If you want to continue to use it, change
the temperature level to level 0, wait a
few seconds, and then select the desired
temperature.
Ensure that the regulator is properly
connected to the product and that there is
voltage in the socket
of the mains used ,and that the product is
properly plugged in to the same.
Publicité
