SCHOLTES HLI 997 Instructions Pour L'installation Et L'emploi page 15

structure and fix with a total of 8 screws (2 per
corner). If supplied, fix the second reinforcement
bracket in a position equidistant between the first
reinforcement bracket and the upper side of the
lattice. Secure with 8 screws (2 per corner).
! When you position and secure the reinforcement
bracket or brackets, make sure that the discharge
tube or the baffle (depending on the model that
you are installing) can easily be secured as well.
3. Place the ceiling hole diagram directly above the
cook-top (the center of the diagram must match
the center of the cook-top and the edges must be
parallel to the sides of the cook-top – The side with
the arrow corresponds to the front of the hood).
Prepare the electrical connection.
4. Drill as shown (6 holes for 6 wall plugs – 4 plugs
for fixture), screw the outer screws leaving a space
of about 1 cm between the screw head and the
ceiling.
5. Fit an exhaust pipe inside the truss and connect it
to the motor compartment connection ring B
(exhaust pipe and fixing brackets are not
included).
6. Hook the frame onto the 4 screws (see step 4).
! The side with the connection box must
correspond to the right side of the hood.
GB
15