Interfaces And Functions - SMA SUNNY BOY 3.0-US Instructions D'installation

4 Product Overview
Symbol Explanation
Equipment Grounding Terminal
This symbol indicates the position for the connection of an equipment ground-
ing conductor.
UL 1741 and CSA C22.2 No. 107.1 are the standards applied by Under-
writers Laboratories to the product to certify that it meets the requirements of
the National Electrical Code
IEEE 1547.
4.3

Interfaces and Functions

The inverter can be equipped or retrofitted with the following interfaces and functions:
User interface for configuration and monitoring
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product.
The product user interface can be called up via the web browser if there is an existing connection
to an end device (e.g. computer, tablet PC or smartphone).
Smart Inverter Screen
The Smart Inverter Screen enables you to view the status display and to display the current power
and consumption on the user interface login page. This gives you an overview of the most important
inverter data without having to log into the user interface.
The Smart Inverter Screen is deactivated by default. The Smart Inverter Screen can be activated via
the user interface once the inverter has been commissioned.
SMA Speedwire
The product is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. SMA Speedwire is designed for a data transfer
rate of 100 Mbps and enables optimum communication between Speedwire devices within
systems.
The products supports the encrypted system communication with SMA Speedwire Encrypted
Communication. In order to be able to use the Speedwire encryption in the system, all Speedwire
devices, except for the SMA Energy Meter, must support the function SMA Speedwire Encrypted
Communication.
Class 1 wiring methods are to be used for field wiring connection to the terminals of the
communication interface.
SMA Webconnect
The inverter is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the inverter and Sunny Portal (online monitoring system
from SMA).
16 SBxx-1SP-US-41-IA-xx-12
®
, the Canadian Electrical Code
SMA Solar Technology AG
®
and
Installation Manual