Publicité
Les langues disponibles
Les langues disponibles
3. Fix the front grill and the rear grill with circlip clip and then use the fasten clip to tighten the fan grill. (Fig.3)
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the
illustration in the drawing shall be subject to the real subject.
Operation instruction
Speed control :
Speed is controlled by the piano switch. (-0 -1 -2 -3)
0-off
1-low
2-medium
3-high
Oscillation control :
To make the fan oscillate, push down on the oscillating clutch knob located on the top of the motor housing. To stop the
fan down from oscillating in the position desired, push on the oscillating clutch knob once more.
Tilting control :
To adjust the air flow upward or downward, push the grilles lightly to the desired direction.
Maintenance instruction
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is
needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble
the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the following as a
cleaner : gasoline, thinner.
5. Keep the motor housing or interior pats out of water or any other liquid.
VENTILATEUR A POSER Ø30CM 40W – Ø12'' 40W DESK FAN
Notice
BRICODEAL SOLUTIONS – 4 rue Yves GLOTIN – CS40005 33083 BORDEAUX CEDEX - FRANCE
Publicité
