General Safety Information; Intended Purpose; Overview - Grizzly HRM 38 Traduction De La Notice D'utilisation Originale

General Safety Information

Caution: to avoid accidents and
injuries:
• Children and young people under the
age of 16 and people who are not fa-
miliar with these instructions must not
work with the machine.
• Never turn the machine on when
people and particularly children or ani-
mals are nearby.
• People with motor disorders are not to
operate the machine without supervi-
sion.
• Do not use the machine with bare feet
or when wearing open sandals. Only
run the machine at walking pace.
• When working, ensure a firm foot-
hold, particularly on slopes. Always
work across the slope, never up or
downwards. Take particular care when
changing the direction of travel on the
slope. Do not work on excessively
steep slopes.
• When switching the machine on,
avoid feet or hands being trapped
between the moving blades and the
fixed parts of the machine.
• Never carry the machine by the blade
cylinder.
Caution! To avoid damaging the
machine and potential injury as a
consequence:
• Check the terrain on which the ma-
chine is used and remove stones,
sticks, wires or other foreign bodies
that may be picked up and flung out-
wards.
• Ensure that the machine is in a safe
operating condition. Replace worn or
damaged parts.
• Protect the machine from the effects
of weathering (damp, frost).

Intended Purpose

The machine is intended only for mowing
lawns and grass areas in the domestic
domain.
The operator or user is responsible for
accidents or injury to other people or dam-
age to their property.
The manufacturer shall not be liable for
damages caused by improper use or in-
correct operation. This equipment is not
suitable for commercial use.
Commercial use will invalidate the guar-
antee.

Overview

See the pages 2 - 4 for illustra-
tions.
1 Handle top
2 2 centrepieces
3 Machine key
4 Metal strips (feeler gauge)
5 Machine holder
6 Handle bottom
7 Handle holder
8 Blade cylinder
9 Castors
10 2 screws for adjusting the
blades
11 Sub-blade
12 2 locknuts
13 2 wheels
14 2 adjustable handles and scales
for height adjustment
15 4 screws and 4 wing nuts for the
handle fixing
GB
19