Kenwood KDC-X896 Guide De Démarrage Rapide page 13

Fuse (10A)
Wiring harness
(Accessory1)
If no connections are made, do not let the wire come out from
the tab.
Blue/White
(Power control wire)
Blue (Antenna control wire)
Brown (Mute control wire)
Orange/ White
(Dimmer control wire)
Light Blue/ Yellow
(Steering remote control wire)
FM/AM antenna input
R L
When using the optional power amplifier,
connect this wire to its power control
P.CONT
terminal.
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
ANT.
power terminal for the booster amplifier of
CONT
the film-type or short pole type antenna.
(Max. 300mA, 12V)
Connect to the terminal that is grounded
when the telephone rings or during
conversation. (This wire functions only for
MUTE
the KDC-X496, KDC-452U, and KMR-550U.)
⁄
To car light control switch
ILLUMI
To use the steering wheel remote control
feature, an exclusive remote adapter (not
REMOTE CONT
supplied) that matches your car is required.
STEERING WHEEL
REMOTE INPUT
Rear output
R
L
Front output
Subwoofer output
Microphone (Accessory5)
(KDC-X896, KDC-BT852HD only)
To connect the Kenwood navigation
system, consult your navigation
manual.
English | 13