Listening To Music Via Bluetooth - Yamaha MusicCast VINYL 500 Mode D'emploi

|
Playback

Listening to music via Bluetooth

Listening to music via Bluetooth
You can play music files stored on a Bluetooth device (such as a smartphone) on the unit.
NOTE

In order to use Bluetooth functionality, set the WIRELESS switch located on
the back panel of this unit to AUTO. ( page 14)

For information on supported Bluetooth devices, refer to "Supported devices
and file formats" ( page 43).
1
On the top panel of this unit, press SOURCE to switch the source
to Bluetooth.
The SOURCE indicator is lit blue.
2
On the Bluetooth device, turn the Bluetooth function on.
3
On the Bluetooth device, select this unit from the list of available
devices.
When this unit connects to a Bluetooth device, the
indicator is lit.
NOTE

If you are prompted to enter a passkey, enter the number "0000".

If the unit is registered as a MusicCast device, the room name will
appear on the available device list.
30
En
4
On the Bluetooth device, select a song and start playback.
(Bluetooth)
NOTE

If the unit detects a Bluetooth device that was previously connected,
the unit will automatically connect to the Bluetooth device after you
perform Step 1. To establish another Bluetooth connection, first
terminate the current Bluetooth connection.

To terminate a Bluetooth connection, perform one of the following
operations:
- Disconnect from the Bluetooth device.
- Select any option other than "Bluetooth" as the source for this unit.

If you enable Bluetooth standby, this unit automatically turns on when
a connect operation is performed on the Bluetooth device.
( page 33)