Bi-Amplification And Bi-Wiring - Triangle ESPRIT Ez Mode D'emploi & Garantie

Connections
For optimal sound reproduction, we suggest that you choose a loudspeaker cable of high quality to
connect your amplifier to your TRIANGLE loudspeakers. You should use cables of the same lengh
for the left and right channels and take special care to respect the + and - polarity for each channel.
Don't forget to strip the cables if it's necessary.

Bi-amplification and bi-wiring

For those wishing to iprove their listening system further, it is possible to use a bi-amplification or
bi-wiring.
A
With bi-amplification, interference between the woofers and other drivers is totally eliminated, as
each one is driven by its own amplifier. It is compulsory to use identical amplifiers to conserve the
uniformity of the loudspeaker.
To do this, remove the terminal jumpers and use two stereo amplifiers. On the speakers, the upper
terminals are the signal inputs for midrange and treble. The lower terminals are the signal inputs
for bass. Use one amplifier to feed the bass, and the second for the midrange and treble (see the
diagram below).
B
Instead of two amplifiers, you can use a single amplifier if it is equipped with two sets of speakers A
and B. Both sets should be selected. This is bi-wiring and not bi-amplification.
For further informations concerning your system, please consult our website :
http://trianglehifi.com/
26