Publicité
Les langues disponibles
Les langues disponibles
Turning on the water heater.
There is no power button for this unit. Once the water heater is
wired and power is supplied, it will be on. The display will show
the current water temperature setting. Current operating mode
for the water heater is illuminated.
To comply with safety regulations, the controls are factory
preset to 120°F (49°C) and Hybrid Mode. It is recommended
that the unit be set to Heat Pump (only) mode to maximize
energy savings. Operating in Hybrid mode provides a balance
of energy savings and hot water use convenience. Reported
energy consumption is based on operating the unit in Hybrid
mode at a temperature setting of 135°F (57°C), and operation
at lower temperature settings or in Heat Pump (only) mode will
provide even greater energy savings.
6
Publicité
Chapitres
