Geonav 11C Manuel D'emploi Et D'installation page 23

NAVIONICS Electronic Charts
Converting depth values into the units
set
Press GOTO to display the menu,
select SETUP/GENERAL, DEPTH
UNITS and then set the unit de-
sired in meters, feet or fathoms.
The GEONAV will convert all the
depth values in the unit selected,
making them appear like those re-
ported in the official nautical
charts (see the figure).
Displaying abbreviated navaid characteristics
Position the manual cursor on the navaid symbol. A window
will show the abbreviated characteristics relative to the navaid
selected.
Description of navaid characteristics:
ABBREVIATIONS FOR LIGHT
AL alternating
F fixed
FLL fixed and flashing
FL (...) group flashing
FL single flashing
IQ interrupted quick
OC single-occulting
OC (...) composite group occulting
Q continuous group
ABBREVIATION FOR PERIOD
..S xx seconds
Displaying object attributes
Move the manual cursor on top of an object on the chart, then
press the joystick. A window will show the description of all
the objects present on the chart at the cursor's position. Se-
English
ABBREVIATIONS FOR COLOUR
AM amber
B black
BL blue
G green
OR orange
R red
VL violet
W white
Y yellow
ABBREVIATION FOR RANGE
..M xx nautical miles
20