Velleman CCTVPROMT1 Guide D'installation Rapide page 6

DVR Status
key lock
overwrite on
internet disconnected
local connection
USB flash drive/device connected
IVS on
timer recording on
PTZ mode on
sequence mode on
Channel Status
original size
live audio on
recording
record mode: Frame
virtual fence event
Icons for Recording
 manual recording
By default, manual recording is on (
 event recording
The event icons,
and the related record function is on.
 timer recording
When timer recording is on,
 HDD overwrite
By default, the HDD overwrite function is set to ON, and
Note: To disable the overwrite function, right-click to display the main menu in the live view window. Then
select (ADVANCED CONFIG) > RECORD > OVERWRITE.
6.3 Quick Menu Bar
Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:
Quick Menu (extended)
V. 01 – 25/02/2016
fit to screen
audio off
human detection
event
record mode: Field
one way pass event
) when the DVR is powered on and a HDD is installed.
/ / / / /
is displayed on the screen.
CCTVPROMT1
key unlock
overwrite off
internet connected
USB mouse connected
no USB device connected
timer recording off
PTZ mode off
sequence mode off
DCCS connection OK
audio playback on
motion event
record mode: CIF
scene change event
, are shown on the display when their respective events occur
is displayed on the screen.
Click to show the channel switch panel and select the
channel you want.
Click to display the playback control panel, and click
to play the latest recorded video clip, or click
to enter the search list.
Switch to the channel you want first, and click
enter the zoom-in mode. In this mode, click and drag
the red frame on the bottom left of the screen to
move to the place you want to see. To exit this mode,
click .
Click to show the power off panel to either halt or
reboot the system.
6
DCCS connection
failed
audio playback off
alarm event
to
©Velleman nv