Siemens LC 85 K 950 Mode D'emploi Et Notice De Montage page 18

Operating procedure
Do not place any objects on the extractor
hood.
The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Acoustic signal:
When a button is pressed, this is verified by
an acoustic signal.
Switching off the acoustic signal:
Simultaneously press buttons 0 and + until
a signal is emitted after approx. 3 seconds.
Switching on the acoustic signal:
Repeat the process.
Switching the fan ON
Press the + button
Setting the required fan speed:
Press the + button. The fan speed is
increased by one step.
Press the – button.
The fan speed is reduced by one step.
Switching the fan OFF:
Press the 0 button.The displayed 0 goes
out shortly afterwards.
Or:
Keep pressing the – button until the fan
switches off.
The displayed 0 goes out shortly afterwards.
Intensive setting:
Maximum power is obtained at the intensi-
ve setting. It is only required for short
intervals.
Keep pressing the + button until a P appears
in the display.
If the intensive setting is not cancelled by
hand, the fan will automatically switch back
to step 2 after 10 minutes.
Fan follow-on:
Press the button.
I
The fan runs for 10 minutes at setting 1.
At the same time the
Then the fan switches off automatically.
Lighting:
Briefly press the
on and off.
The light can be switched on at any time,
even though the fan is switched off.
Switching on the light automatically, e.g.
via a timer:
Fan and light must be switched off.
Switching on:
Simultaneously press the – and
buttons.
After approx. 3 seconds the light switches
on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
After approx. 3 seconds the light
switches off to acknowledge the setting.
display comes on.
I
button to switch the light
I
en