Placement - Yamaha YST-FSW150 Mode D'emploi

Placement

The following illustrations are the setting images
of this unit.
Example 1: Using this unit with Yamaha
Digital Sound Projector
Yamaha Digital Sound Projector
Example 2: As a part of multi channel
speaker system
Notes
• Do not place this unit on/under any other components
in a pile. The vibration of this unit may cause system
failure, etc. in other components.
• Keep enough ventilation space on the front, the rear,
and the bottom side (that attached legs) of this unit.
Do not place this unit on a thick carpet etc.
2
En
This unit
This unit
y Tip
You can also place this unit vertically.
When you want to do so, fix a stand using the supplied
screws (YST-FSW150 only) and then attach pads as
shown below.
Note
When placing this unit vertically, set the bottom side
(that attached feet) of this unit toward a wall.
YST-FSW150
Upside-
down OK
y Tip
You can also place this unit in a TV rack etc.
Note
If vibrations of this unit cause abnormal noise or
sympathetic vibrations on nearby components, attach the
supplied non-skid pads to the bottoms of the legs.
Bottom view
(example: YST-FSW150)
Non-skid
pads
YST-FSW050
Foot
Upside-
down OK