Osd Rotation Support; Hdmi Out; Real Time Clock (Rtc) - VESTEL IFD65T642/A3 Manuel D'utilisation

and the browser bar which contains previous/next
buttons, the refresh button, the address/search bar,
the Speed Dial and the Opera buttons are available.
To add a desired website to the Speed Dial list for
quick access, move the cursor to the top of the page.
The browser bar will appear. Highlight the Speed Dial
- button and press the OK button. Then select Add
to Speed Dial option and press the OK button. Fill in
the blanks for Name and Address, highlight OK and
press the OK button to add. Whilst you are on the
site you wish to add to the Speed Dial list, highlight
the Opera- button and press the OK button. Then
highlight Add to Speed Dial option in the submenu
and press the OK button again. Name and Address
will be filled automatically according to the site you are
visiting. Highlight OK and press the OK button to add.
You can also use the Opera menu options to manage
the browser. Highlight the Opera-
the OK button to see available page specific and
general options.
There are various ways to search or visit websites
using the web browser.
Enter the address of a website(URL) into the search/
address bar and highlight the Submit button on the
virtual keyboard and press the OK button to visit the
site.
Enter keyword/s into the search/address bar and
highlight the Submit button on the virtual keyboard
and press the OK button to start a search for the
related websites.
Highlight a Speed Dial thumbnail and press the OK
button to visit the related website.
Your Display is compatible with USB keyboards/mice.
Plug your device into the USB input of your Display
for easier and quicker navigation.
Some web pages include flash content. These are not
supported by the browser.
Your Display does not support any download
processes from the internet via the browser.
All sites on the internet might not be supported.
According to the site; content problems may occur.
In some circumstances video contents might not be
able to be played.

OSD Rotation Support

You can change the
OSD (On Screen Display)
of your Display if desired. While performing First
time installation set the OSD Orientation option
as desired when the Signage Settings menu is dis-
played. You can also change this setting later from the
Signage Settings>Controls menu. Available options
are:
Landscape, Portrait 1 and Portrait 2

HDMI Out

The HDMI port located on the rear left side of the
Display functions as an output port (upper HDMI port).
This port will not function as an input, thus no source
devices should be connected to this port. Only the
content received from the HDMI input port located also
on the rear left side of the Display (lower HDMI port)
can be outputted from this port. The contents received
from other inputs, such as VGA, DVI or Display Port,
can not be outputted. This is a default function and
you can not disable/enable through any menu option.
HDMI output port will always function if a source de-
vice is connected to the specified HDMI input.

Real Time Clock (RTC)

Your Display has an RTC. It is used to maintain the
real date and time information for a period of time if
button and press
the energy supply is interrupted by separating the
Display from the mains or by a power blackout. In this
case the Display will use the date and time information
stored in RTC.
• All time sources are able to override RTC date/time.
• Display tries to connect to the NTP server period-
• The RTC battery provides power to the integrated
• If RTC is used as time source, manual date-time
rotation
.
English - 26 -
ically (6 hours after last update) to get the current
date and time information. If the Display successfully
gets these informations from the NTP server, it
updates itself and RTC with the received date and
time information. If the NTP server update fails, the
Display uses RTC time and date to update itself.
real-time clock and the calendar. Without any
external power source, RTC is able to function for
a minimum of 14 days.
set is enabled from Date/Time option in the
System>Settings menu.