senya SYCP-HB010R Notice D'utilisation page 16

 Turn the lid clockwise until it locks in place and make sure that the tab on the lid is
firmly inserted in its slot.
 Plug the blender into the power supply. The On/Off button
appliance is ready for use.
USE OF THE MODES
Make sure that the variable speed control is set to the "0" position
5- Press the
red colour) and the other buttons flash (blue colour).
6- Press the
7- The programme automatically starts and the cooking time takes about 20-25
minutes. During the cooking process, the
colour).
8- At the end of the cooking process, an audible signal will sound and the
switches off. The soup is ready to be tasted.
Note:
During cooking, it is quite normal for the appliance to make a noise, blend the food
-
several times and small jets of steam to escape from the appliance.
Do not use the blender function when the "creamy soup" program is selected.
-
You can also interrupt the preparation at any time by pressing the
-
appliance switches to standby mode and the button flashes (red colour).
1- Press the
(continuous red colour) and the other buttons flash (blue colour).
2- Press the
1 Blender function (11)
Hot creamy soup mode:
(creamy soups, hot coulis)
button to switch on the appliance. The
button that lights up (continuous blue colour).
Hot blended soup mode:
(Blended soups, purées)
button to switch on the appliance. The
button that lights up (continuous blue colour).
On/Off (7)
Steam cooking (8)
Blended soup (9)
Creamy soup (10)
PULSE/self-cleaning function (11)
Crushed ice function (11)
button remains permanently lit (red
16
flashes. Your
button lights up (continuous
button. The
button lights up
button