Installation; Site; Ventilation - Schaub Lorenz SL300B CB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLIMATIC CLASS
SN
N
ST
T

3. Installation

3.1 Site

1. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
3. Install the appliance in a dry and well-ventilated place.
4. Protect the appliance from direct sunlight.
5. The doors must open completely and without hindrance.
6. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
7. Connect the appliance to the mains properly.
8. The nameplate is situated inside the appliance or at the back.

3.2 Ventilation

AMBIENT TEMPERATURE
+10
0
→+32
0
+16
0
→+32
0
+16
0
→+38
0
+16
0
→+43
0
Minimum distances
C
e.g. unheated cellar
C inner home temperature
C inner home temperature
C inner home temperature
25

Publicité

Table des Matières
loading

Table des Matières