IBM ESCALA PL 220T Guide De L'utilisateur page 139

Table des Matières

Publicité

Exemples de configuration de modem
Fichier d'exemple modem_m0.cfg
#
# COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP: modem_m0
#
# FUNCTIONS: Modem configuration file specifically for IBM 7852–400
# modem with Auto–Reliable feature. This feature must be turned off
# for Catcher calls. This example uses the AT&F reset command to
# choose the factory defaults.
#
# (C) COPYRIGHT International Business Machines Corp. 1996
# All Rights Reserved
# Licensed Materials – Property of IBM
#
# US Government Users Restricted Rights – Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#
#
# The modem has configuration switches. They should be set to the
# factory default settings, except switches 11 and 12. These must be
# to UP ("AT" responses) and DOWN (Asynchronous operation), respectively.
ICDelay 1
DefaultTO 10
CallDelay 120
#
# %N Call–Out phone number %R Return phone number
#
#
# PROGRAMMING NOTE: No blanks between double quote marks (").
condout: send "AT&F&E2E0T\r"
ignore "0\r" or "OK\r\n" timeout 2
send "AT&E12&E14\r"
expect "0\r" or "OK\r\n" timeout 2
send "AT&SF1&S0S9=1\r"
expect "0\r" or "OK\r\n" timeout 2
send "ATV0S0=0\r"
expect "0\r" or "OK\r\n" timeout 2
done
connect: send "ATDT%N\r"
expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or
"19\r" or "13\r" or "12\r" or "1\r" busy "7\r"
timeout 60
done
retry:
send "A/"
expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or
"19\r" or "13\r" or "12\r" or "1\r" busy "7\r"
timeout 60
done
disconnect:
delay 2
# Reset to factory defaults
# Reliable mode
# Echo off
# Ignore modem response.
# Disable pacing
# Disable data compression
# Confirm commands successful.
# DSR independent of CD
# Force DSR on.
# CD respond time=100ms
# Confirm commands successful.
# Numeric response code
# Auto–Answer off
# Confirm commands successful.
# Tone dialing command.
# %N from Call Home setup.
# Expect a connection response.
# Repeat the previous command.
# Expect a connection response.
# Separate from previous data.
Configurations de modems
C-7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Escala pl 220r

Table des Matières