Mode Sub-Menu - OHAUS FD Serie Manuel D'instructions

EN-18
3.7.5

Mode sub-menu

Press Yes to enter the Mode sub-menu.
Reset
Press Yes to enter the Reset menu.
• No – does not change the Mode sub-menu settings.
• Yes – reset the Mode sub-menu to the factory
default settings (bold and underlined text herein).
Checkweigh mode
Press Yes to enter the Checkweigh menu.
• Off – disable the Checkweighing mode.
• On – enable the Checkweighing mode.
Alert
Press Yes to enter the Checkweigh Alert menu.
• Off – disable alert beeping.
• OK – beep when the green Accept light is on.
• Lo – beep when the yellow Under light is on.
• Hi – beep when the red Over light is on.
• Lo-Hi – beep when the yellow Under or red Over light is on.
• Change – beep once when the green Accept light is on,
twice when the red Over light is on.
End
• Press Yes to leave this sub-menu and go to the next.
• Press No to return to the top menu item in this sub-
menu.
FD Series Scales