Picture Menu - Schneider Ld24-Sch13Wht Manuel D'utilisation

Press Source on the unit or remote control to select DVB-T input source.
Common procedure for initial settings
- Press MENU button on the remote control to display the main menu.
- Press navigation button to select submenus.
p /q
- Press OK or
- Press navigation button to select preferred option.
p /q
- Press navigation button to adjust the value.
- Press OK button to confirm selection.
- Press MENU button to return to previous menu page.
- Press EXIT button to exit menu page.

Picture Menu

Picture Mode
Brightness
Picture
Contrast
Sharpness
Sound
Colour
Channel
Colour Temperature
Feature
Aspect Ratio
Setup
Move
OK
Picture Mode
Available options: User, Mild, Standard, Dynamic.
Brightness
The brightness value of picture can be adjusted from 0-100.
Contrast
The contrast value of picture can be adjusted from 0-100.
Sharpness
The sharpness value of picture can be adjusted from 0-10.
NOTE: The value of Brightness, Contrast, Color, and Sharpness is adjustable
only in User picture mode.
Colour
The colour saturation value of picture can be adjusted from 0-100.
Tint
This item is used to adjust the tone of color in NTSC system from 0-100.
Colour Temperature
This item is used to adjust the optimum colour temperature for suitable viewing.
Available options: Standard, Cold, Warm.
navigation button to enter submenu page.
Picture
Standard
50
50
5
50
Tint 50
Standard
16:9
Enter Exit
Exit Menu
Picture
Sound
Channel
Feature
Setup
Return Move
47
Picture
Noise Reduction
Enter Exit
OK Exit
Middle
Return
Menu