Sony CMR-PC1 USB Mode D'emploi page 9

If the "Add New Hardware Wizard" dialog box appears
when you connect your camera
If this happens, install drivers as follows:
1
The "Add New Hardware Wizard" searches for new drivers for the
USB Composite Device.
Click [Next].
2
Select "Search for the best drive for your device" and click [Next].
3
Insert the Sony USB Camera CD-ROM in the CD-ROM drive.
4
Select "Specify a location" and type "d:\Win98\Drivers" where
"d:\" is the drive letter for your CD-ROM drive, then click [Next].
Windows starts installing the drivers.
5
"SONY USB CAMERA Video Capture Device" appears in the
"Add New Hardware Wizard" dialog.
Click [Finish].
6
If driver installation was successful, "SONY USB CAMERA
Video Capture Device" is displayed under "System Properties" -
"Device Manager" - "Imaging Device".
Continued
GB
9