Important Safety Information - Danby Designer DUFM026B1WDD Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INFORMATION
Please ensure that component parts shall be replaced with like components and that servicing shall be done
by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts
or improper service.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electri-
cal short circuit, grounding reduces the risk of electrical
shock by providing an escape wire for the electrical
current.
This appliance is equipped with a cord having a grounding
wire with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
DO NOT USE AN EXTENSION CORD
Use an exclusive 115V wall outlet. Do not connect your
freezer to extension cords or together with any other appli-
ance in the same wall outlet. Do not splice the cord.
WARNING:
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or
service agent if the grounding instructions are not completely understood or if doubt exists as to whether
the appliance is properly grounded.
IMPORTANT WARNING!
An empty freezer is a very dangerous attraction to children. Remove the gasket, latches, lids or doors from
unused appliances, or take some other action that will guarantee the appliance harmless.
DANGER: Risk of child entrapment. Before you throw away your old freezer:
• Take off the doors.
• Leave the shelves in place so that children may not easily climb in.
WARNING! EXPLOSION HAZARD!
Risk of fire or explosion due to puncturing of refrigerant tubing. Do not use sharp objects to aid in defrost.
Please handle with care. Keep flammable materials and vapors such as gasoline away from the freezer.
Use nonflammable cleaner.
Disposal of this unit should be in accordance with federal and local regulations.
READ ALL SAFETY INFORMATION BEFORE USING
DON'T WAIT! DO IT NOW!
SAVE THESE INSTRUCTIONS!
BEFORE FIRST USE
Before connecting the appliance to an electrical power
supply, let it stand for about 24 hours, which will reduce the
possibility of malfunctions in the cooling system due to trans-
port handling.
Clean the appliance thoroughly, especially in the interior (See
"Care and Maintenance" section).
READ INSTRUCTIONS BEFORE USE
These instructions for use are intended for the user. They
describe the appliance and the correct operating procedures
for safe use.
1

Publicité

Table des Matières
loading

Table des Matières