Conventional Use - EMAG Emmi 12HC Mode D'emploi

3. conventional use

The equipment may only be used for the purpose as set forth in the
catalogue and in the technical descriptions which means for ultrasonic
cleaning as described in this instruction, and only in conjunction with
external devices and components which are recommended or approved
by EMAG AG. Any other use of the equipment is considered to be non
conventional.
In case of non conventional use, EMAG AG will not be liable for pos-
sible damages and will not warrant for the correct and functional work of
the components. Part of the conventional use is also the observance of
all information given in the operating manual. To this attention is drawn
by the sign on the type plate. The correct and safe operation of the
equipment implies appropriate transportation, storage, installation and
assembly as well as careful handling and maintenance.
12