BH bikes CORE Manuel page 34

EN
USER MANUAL
STANDBY
CHARGING
CHARGING PROBLEM
100% CHARGED
WARNING
ATTENTION
NOTE
34
• Never charge or use a damaged battery.
• Be careful not to touch the charger during the charging process. It may be
hot, especially in high ambient temperatures.
• If a fault occurs while the battery is being charged, remove the charger's
power plug from the socket and wait for the battery to cool down.
• Never touch the power plug, charging plug or contacts with wet hands.
• Make sure that there is no foreign matter on the battery's contacts before
placing it on the bicycle.
• Do not connect the charger's power plug to the battery or bicycle's char-
ging port if it is wet or damp. Make sure that you only connect the power
plug when the battery or bicycle's charging port is completely dry.
• Do not apply excessive force on the power plug or pull the cable with the
power plug connected to the battery.
• Stopping the battery charging process does not damage the battery.
• The battery achieves its maximum service life in ambient conditions of
15-25 °C.
1º
External port
Charger
Battery port
1º
Charger
CORE
2º
2º
External port
Battery port
12