Forsthoff QUICK-S-ELECTRONIC Instructions D'emploi page 12

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
EN Operating Instructions
De-activation:
Turn the potentiometer 6 to position 0 for cooling
down. Once the unit has cooled down, set the
switch 5 to 0.
Maintenance, service and repairs:
Check mains connection lead and plug for
breaks and mechanical damages!
Before commencing with any work on the device,
disconnect the mains plug!
Always keep the device and air intake screens
clean. If necessary, clean the dirty screens with
a brush while the device is switched off. Only
original accessories may be used.
Once the carbon brushes reach the minimum
length, the fan motor will switch off automati-
cally. The service life of the carbon is at least
1500 hours (approx). Have the carbon brushes
replaced by an authorised service centre or a
specialist company.
Repairs on the device should only be performed
by an authorized repair shop.
Technical Data:
Nominal voltage
range:
Frequency range:
Output:
Output temperature:
Noise emission level:
Protection class:
Weight:
Disposal
Do not dispose of in the household trash.
Add the device that is no longer able to be
used to a separate collection for the pur-
pose of environmentally friendly recycling.
12
120 V or 230 V~
50Hz - 60Hz
120 V 1650 W or 230 V
1500 W
≤ 700°C
< 70dB
II /
(double insu-
lated)
1.4 kg including mains
connection lead
Help in the event of problems:
Forsthoff GmbH
Freiheitstr. 24
42719 Solingen
DEUTSCHLAND
Tel: +49 (0)212 - 33 60 52
Fax: +49 (0)212 - 33 69 16
E-Mail: info@forsthoffwelding.com
Internet: http://www.forsthoffwelding.com
EU Declaration of Conformity
Forsthoff GmbH, Freiheitstr. 24,
42719 Solingen
hereby declares that the product
Equipment type: Hot air fan
Model name: QUICK-S-ELECTRONIC
agrees with the requirements of the following
European Directives:
EU Directive 2006/95/EU - NSR
EU Directive 2004/108/EU - EMC
The concurrence of the specified product with
the requirements of Directive 2006/95/EU is
proven by the observance of the following stan-
dards:
EN 60335-1:2002 + A11:2004 + A1:2004 +
A12:2006 + Corrigendum:2006 + A2:2006
EN 60335-2-45:2002
the last two digits of the year in which the CE
marking was attached: 08
The concurrence of the specified product with
the requirements of Directive 2004/108/EU
is proven by the observance of the following
standards:
EN 55014-1:2006
EN 61000-3-2:2006
EN 61000-3-3:1995 + A1:2001 + A2:2005
This Declaration certifies the compliance with the
aforementioned Directives, but does not encom-
pass any assurances with regard to properties in
a legal sense. The Safety Information in the sup-
plied product documentation must be observed.
Solingen, 28.11.2008
Andrea Forsthoff-Neeff
Managing Director, Owner

Publicité

Table des Matières
loading

Table des Matières