Symbols On The Product; Electrical Safety Instructions; Symbols In The Instructions - ACU-RITE DRO 100 Guide D'installation

2.5 Obligations of the operating
company
The operating company owns or leases the product and
the peripherals. It is responsible that the intended use is
complied with at all times.
The operating company must:
Assign the different tasks to be performed on the
product to appropriate, qualified, and authorized
personnel
Verifiably train personnel in the tasks they are allowed
to perform and how to perform them
Provide all materials and means necessary in order for
personnel to complete the assigned tasks
Ensure that the product is operated only when in
perfect technical condition
Ensure that the product is protected from unau-
thorized use
2.6 General safety precautions
The safety of any system incorporating the
use of this product is the responsibility of the
assembler or installer of the system.
The product supports the use of a wide
variety of peripheral devices from different
manufacturers. HEIDENHAIN cannot make
any statements on the specific safety
precautions to be taken for these devices. The
safety precautions provided in the respective
documentations must be observed. If no such
information has been supplied, it must be
obtained from the manufacturers concerned.
The specific safety precautions required for the individual
activities to be performed on the product are indicated in
the respective sections of these instructions.
2.6.1

Symbols in the instructions

The following safety symbols are used in this manual:
Symbol Meaning
Identifies information that warns of person-
al injury
Identifies electrostatic sensitive devices
(ESD)
ESD wristband for personal grounding
8
2.6.2

Symbols on the product

The following symbols are used to identify the product:
Symbol Meaning
Observe the safety precautions regarding
electricity and power connection before you
connect the product
Earth (ground) terminal as per IEC 60417 -
5017 . Observe the information on installa-
tion.
2.6.3

Electrical safety instructions

Hazard of contact with live parts when opening the
product.
This may result in electric shock, burns or death.
Never open the housing
Only the manufacturer is permitted to access the
inside of the product
Hazard of dangerous amount of electricity passing
through the human body upon direct or indirect
contact with live electrical parts.
This may result in electric shock, burns or death.
Work on the electrical system and live electrical
components is to be performed only by trained
specialists
For power connection and all interface connections,
use only cables and connectors that comply with
applicable standards
Have the manufacturer exchange defective electrical
components immediately
Regularly inspect all connected cables and all
connections on the product. Defects, such as loose
connections or scorched cables, must be removed
immediately
Damage to internal parts of the product!
Opening the product will result in forfeiture of warranty
and guarantee.
Never open the housing
Only the product manufacturer is permitted to
access the inside of the product
ACU-RITE | DRO 100, DRO 203, DRO 300 | Installation Instructions | 01/2018
WARNING
WARNING
NOTICE