Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Control Panel

2
1
NOTE: Total power drawn from all receptacles must not exceed the name plate rating.
Engine Start Switch – Used to start engine
1
from the starter motor(Electric start model
only). To start engine, press and hold the
switch in the "START"(ll) position, the
engine will crank and attempt to start. When
the engine starts, release the switch to the
"RUN"(l) position.
2
4-1 Data-Minder(Multi-Meter) – Push the
SELECT button to show the Voltage, Hertz and
running hours. If the low oil indicator is lit,
check the oil level.
A - Digital display
B - AC voltage indicator
C - Frequency indicator
Battery Switch – Power the electric starter.
3
4
5
6
120V, 30A Twist-Lock (NEMA L5-30R)
Maximum full load 30 Amp current may be
drawn from this 120 Volt receptacle.
English
3
4
5
D - Hour indicator
E - Low oil indicator
F - Select button
Page 11
7
6
11
120V, 30A RV (NEMA TT-30R)
7
Maximum full load 30 Amp current may be
drawn from this 120 Volt receptacle.
120V, 20A Duplex – (NEMA 5-20R) 20 Amp
8
of current may be drawn from this 120 Volt
receptacle.
9
Ground Terminal – Consult an electrician
for local grounding regulations.
Outlet Cover - Protect the receptacles from
10
dust and debris.
11
8
9
10
Customer Service: 1-844-347-6261

Publicité

Table des Matières
loading

Table des Matières