Installing the Station
2
Use the mounting plate as a drilling template after
determining the input to be used, either at the rear or
under the station.
3
Hang the mounting plate securely to a stable surface
using a minimum of 3 anchor screws.
Anchoring
screws
Mininum of 3
Maximum of 6
4
Insert the conductors and secure the strain relief to
the rear housing so that the conductors are long
enough to reach the terminals.
5
Secure the rear housing of the station to the mount-
ing plate.
6
Screw the lower screw to secure the mounting.
8
178 mm / 7'62"
51 mm
2'25"
27 mm
1'06"
107 mm
4'22"
September 2018 | flo.com | Installation guide | FLO Home X5
152 mm
6'00"
406 mm
16'96"
152 mm
6'00"
42 mm
1'69"
Wall structure