External Decoder Set Up - essentiel b MediaTec TNT Notice D'utilisation

External decoder set up

Your MediaTec TNT has audio and video plugs in order to simply connect your
external decoder. This connection lets you enjoy your MediaTec TNT's functionalities
with external sources (satellite decoder, DVB-T, VCR, etc.)
External decoder DVB-T
Once the connection is set up, turn on the external decoder.
On the MediaTec TNT, set channel to « AUX"
The « AUX » channel displays the image and sound coming from the devices
connected to audio/video plugs
« AUX » has the same behaviour as other channels. You can:
○ Add "AUX" to a favourite list
○
Schedule recordings
○
Time shift
On « AUX » you cannot access information on programmes
When you're watching « AUX », the progress bar only shows the memory content.
There is no EPG.
• Remember to switch on the external decoder before zapping to
« AUX »
• For scheduled recordings, remember to let the external decoder
on
• You can only record one programme at once.
External decoder SATELLITE
23
En