essentiel b MediaTec TNT Notice D'utilisation page 57

• If you do not use the
screen saver will start. To exit screen saver mode, press any
button on the remote control.
• The following pictogram indicates that the
loading information.
Television set up
Set-up advice
If you have a flat LCD or plasma screen with an HDMI output, use this first. It
enables you to have a High Definition quality picture.
To get the best quality picture possible, select the most suitable output resolution
on the MediaTec TNT.
To change the
Parameters /
Do test out several output resolution settings as the picture quality can vary
depending on the screen's performance.
If you have a cathode ray tube screen, use a "composite CVBS" cable (yellow).The
signal will be suited to your screen.
MediaTec TNT for a period of time, a
output resolution
Connection /
6
MediaTec TNT is
on the MediaTec
HDMI YUV output
TNT, go to
resolution.
En