Precautionary Measures - Fantom FM1310PC Guide Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRECAUTIONARY MEASURES

IMPORTANT:
If the suction opening in the unit or the hose is BLOCKED, switch off
the vacuum cleaner and remove the clog before you start the unit
again.
1.
Do not operate the vacuum
cleaner close to heaters or
radiators.
2. Before inserting the power plug into
the wall outlet, make sure that your
hands are dry.
3. Do not vacuum liquids.
4. Keep hair, loose clothing, fingers,
feet and all parts of body away from
openings, rotating agitator and other
moving parts.
5.
When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
6.
Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
7.
Do not run appliance over power
cord.
8.
Do not use without dust cup
filter or filters in place.
9.
Before you start vacuuming,
make sure to remove large or
sharp objects that might
damage the vacuum.
3
OPERATING INSTRUCTIONS
WARNING:
Always remove the
power plug from the wall outlet
before assembling or removing
accessories.
Inserting the Telescopic Tube
into the Main Unit
1. Insert the telescopic tube into the
hole on the top of the unit. Make
sure that the telescopic tube fits
correctly into the opening. (Fig. 1)
2. Insert the hand grip into the top
opening of the telescopic tube
making sure that the hand grip
locking pin is in place. (Fig. 2)
3. To remove the hand grip, press the
hand grip locking pin and pull the
hand grip up. (Fig. 3)
4. To remove the telescopic tube,
press the telescopic tube release
button which is located on the back
of the unit and lift the telescopic
tube up. (Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Attaching the Hose Clip
1. Using a Philips screwdriver, remove
the screw that is already attached to
the vacuum body. (Fig. 5)
2. Place the hose clip into the slot in
the back of the vacuum. (Fig. 5)
3. Using a Philips screwdriver and the
screw provided, attach the hose clip
to the vacuum. (Fig. 6)
Fig. 5
Fig. 6
Using with the Accessories
Crevice Tool
For radiators, crevices,
corners, baseboards and
between cushions.
Dusting Brush
The dusting brush is used
for the furniture, venetian
blinds, books, lamp shades
and shelves.
Attaching the Accessories
1. To attach the
accessories to the
Fig. 7
hand grip, remove
the hand grip from
the unit and push
in the desired
accessory.
(Fig. 7)
2. If you wish to
attach the
accessory to
the telescopic
Fig. 8
tube for a
longer reach,
remove the
telescopic tube
and push on
the accessory.
(Fig. 8)
4

Publicité

Table des Matières
loading

Table des Matières