Motor Specifications & Electrical; Requirements - Workshop WS1625AM0 Mode D'emploi

• Do not use retractable handle and
wheels for going up and down stairs.
• Do not use unit as a hand truck or
moving dolly.
• Do not put any object into air intake
openings.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• Direct air discharge only at work area.
Do not direct air at bystanders.
CAUTION:
• For dusty operations, wear dust mask.
• Do not move or carry Air Mover when it
is operating.
• Only operate on a level and stable
surface to prevent it from falling and
possibly causing injury or damage to
unit.
MOTOR SPECIFICATION & ELECTRICAL
This Air Mover is provided with a
3-speed, 115 volt, 60 Hz induction motor
with a grounding conductor. It is
thermally protected and will automatically
shut down if over-heated. Once it cools,
the motor will restart automatically if not
unplugged.
In the event of a malfunction or
breakdown, grounding provides a path of
least resistance for electric current to
reduce the risk of electric shock. This Air
Mover is equipped with an electric cord
having an equipment grounding
conductor and a grounding plug.
SAVE THIS MANUAL

REQUIREMENTS

Observe the following warnings that
appear on the motor housing of your Air
Mover:
WARNING: To reduce the risk of
electric shock, connect only to a
GFCI protected outlet. Do not expose
to water or rain.
CAUTION:
• This fan has an automatic motor
shutoff device; it may restart
without notice. To reduce the risk
of injury, unplug before servicing.
• Do not use an extension cord with
this fan.
WARNING: TO REDUCE THE
RISK OF TIP-OVER DURING
STORAGE OR TRANSPORT, STACK
2-HIGH ONLY.
The plug must be plugged into a
matching outlet that is properly installed
and grounded in accordance with all local
codes and ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3