HAGENUK Fono DS300 Mode D'emploi page 55

different alarms that also work when the phone is switched off. Please
make sure that the battery has suffi cient capacity to provide the alarm
function.
8.9 Services
The fi rst entry are services offered by the mobile phone provider of your
SIM card.
Furthermore you can enter here all settings for WAP services and data
accounts. Such settings are different with the several mobile phone pro-
viders, so you have to contact them for support on this subject.
The Bluetooth interface is also managed by this menu. Bluetooth is sup-
ported for both SIM cards, but some Bluetooth devices (Headsets, Car
Kits) have problems with the fast switch between the two SIM cards.
Therefore we recommend putting the most used SIM card into SIM1
slot.
In addition to the profi le (headset or handsfree) needed for headsets,
car-kits or fi xed installed solutions this mobile phone also supports the
A2DP profi le for high quality audio transmission. To transfer multimedia
fi les like pictures, videos, musik or exchange vCard information a microSD
memory card must be present. Otherwise the phone has not enough me-
mory to run the communication.
To connect a Bluetooth device you must fi rst power on the Bluetooth
device, then select My device and Inquiry new device. The devices that
you try to connect must be switched into pairing mode – please follow
the instructions in the manual for these devices. A list of found devices
will appear, select the one you want to connect and confi rm it with Bond.
The Bluetooth device may require a PIN code to authorize the connec-
tion, with most devices it is set to "0000" (see also manual).
25