HAGENUK Fono DS300 Mode D'emploi page 46

+ Press RSK and select a contact from the phone book.
+ To place an international call you need to press a „+" before the coun-
try code, which you get by pressing the „ * " key twice.
Some foreign telephone networks have extension lines that cannot be
dialled as dial-through, but need to be entered by the key pad. To dial
these directly as well, press the „ * " key quickly three times in a row after
the telephone number. The „p" character appears and then you can enter
the dial extension.
After you have entered the number you can choose by pressing SIM1
Call Key or SIM2 Call Key which SIM and number should be used to make
the call.
7.2 Accepting a call
Depending on the set mode, the mobile telephone will either ring and/or
vibrate when there is an incoming call. You have the following options
then:
+ To take the call press either SIM1 Call Key or SIM2 Call Key.
+ To reject the call press shortly On/Off Key.
If you have applied for the call line identity service, the calling number
will be displayed on the screen. If the number has been stored in the
phonebook, the name corresponding to the number will be displayed
on the screen.
If the call is to the SIM1, "SIM1" will be displayed in front of the incoming
call number or the name of the caller. If the call is to the SIM2, "SIM2"
will be displayed in front of the incoming call number or the name of
the caller.
16