emerio FH-117208 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
ELECTRIC MEMORY FUNCTION
After use, switch off the appliance but not unplug it. Under this condition, if you turn on the appliance again, the
appliance will keep working with the functions set last time, except for the timer function.
CONTINUOUS MODE FUNCTION
If the appliance keeps working for more than 1 minute without changing any settings, the digital display will be
darkened, and then return to its original brightness after any manual operations.
REMOTE CONTROL
This unit has a remote control. One piece of CR2032 battery should be used for it. Follow bleow illustration to
place or remove battery. Pay attention to the battery polarity when placing the battery.
The functions of the remote control buttons are listed below. You can store the remote control in the recess
provided on the rear panel.
1. ON/OFF button
2. Fireplace illumination button
3. Temperature adjustment (up "+")
4. Temperature adjustment (down "-")
5. Timer adjustment (up "+")
6. Timer adjustment (down "-")
7. Mode seletion button
(Press it to switch among "low heating power", "high heating
power" and "ECO mode".)
8. Oscillation button
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
least 30 minutes. Put the plug in the socket and switch on the heater.
This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
CLEANING AND MAINTENANCE
Before maintaining, please unplug the appliance and make sure the heater has cooled down completely.
Please use soft cloth to wipe the dust on the appliance's surface.
Do not use gasoline, thinner and any other abrasive cleaners to clean the appliance, as these can damage
the surface of appliance.
Make sure the appliance is cooled and dried before packaging. Store it in dry and ventilated places.
- 7 -

Publicité

Table des Matières
loading

Table des Matières