Electromagnetic Fields (Emf) - Philips SalonDry 'n Straight HP4867 Mode D'emploi

Masquer les pouces Voir aussi pour SalonDry 'n Straight HP4867:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
-
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
-
Children should be supervised to ensure that they do not play with
the appliance.
-
Never block the air grilles.
-
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by fluff, hair, etc.
-
Always switch off the appliance before you put it down, even if it is
only for a moment.
-
Always unplug the appliance after use.
-
Do not wind the mains cord round the appliance.
-
You may notice a characteristic odour when you use this
hairdryer. This odour is caused by the ions that are generated and is
not harmful to the human body.
-
Do not probe the ion generator with metal objects.
-
Do not use the appliance on artificial hair.
-
Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
-
Do not insert metal objects into the air grilles to avoid electric shock.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
EnglisH


Publicité

Table des Matières
loading

Table des Matières