Publicité
Les langues disponibles
Les langues disponibles
The Thetford Cassette Toilet is a high quality product. The
toilet forms an integral part of your caravan or camper
bathroom, thanks to its functional design which combines
modern styling and ease of use. The C-250 Cassette Toilet
is manufactured from high quality synthetic materials which
makes it a durable, user and maintenance friendly toilet.
The toilet is made up of two parts: a permanently xed part
and a waste-holding tank that is accessible from the outside.
The removable waste-holding tank is located under the
toilet bowl and can be removed via a door on the outside of
the caravan or camper. The Thetford Cassette Toilet is the
solution to the sanitary problem in your caravan or camper!
The operating instructions in this owner's manual cover
Thetford Cassette Toilet models C-250S, C-250CS (models
connected to the vehicle's central water tank) and C-250CWE
(model with its own ush-water tank). There are differences
in the use of these models. Please ensure that you follow the
instructions that apply to your toilet model.
a) Removable seat and cover
b) Swivelling toilet bowl
c) Blade handle
d) Flush button
e) Waste-holding tank level indicator
f) Water lling door (only if toilet has own ush-water tank)
g) Rotating emptying spout
h) Automatic pressure release vent
i) Sliding cover
j) Removable mechanism
k) Vent plunger
l) Pull-out handle
m) Wheels
n) Blade opener
o) Access door to waste-holding tank
p) Electric blade opener
q) Electric Ventilator
r) Waste Pump-Out system
s) Waste-holding tank multi-level indicator
t) Flush-water tank level indicator (only if toilet has its own
ush-water tank)
Some additional features can be bought at Thetford
dealerships.
1. Open the access door on the outside of your caravan or
camper.
2. Remove the waste-holding tank by pulling the safety
catch (which holds the tank in place) upwards.
3. Pull the waste-holding tank outward. Tip it slightly and
take the tank fully out.
4. Place the tank upright and turn the rotating emptying
spout upwards.
5. Remove the cap, with the measuring cup inside, from
the emptying spout and pour the correct dosage of
Thetford toilet uid (see product label) into the waste-
holding tank. This avoids unpleasant smells and keeps
the inside of the tank clean. Next add approximately 2
litres of water - enough to ensure that the bottom of the
waste-holding tank is covered. For more information on
Thetford toilet uids, see last page of this manual. Screw
the cap back onto the emptying spout and turn back to
its original position.
The emptying spout measuring cap is supplied in
the same packaging as this manual.
Never add toilet uid directly via the blade
or the toilet bowl as this could damage the lip seal of
the waste-holding tank. Always pour the uids via the
emptying spout.
6. Slide the waste-holding tank back into its original
position via the access door.
Make sure that it is secured with the safety catch. Close
the access door and lock it. Your Thetford toilet is now
ready to use.
Never use force if you cannot get the tank
back into place easily. This may cause serious damage.
If blockage occurs, always check if the blade handle is in
the correct (closed) position.
7. For toilets with own ush-water tank: Open the water
lling door and ll the ush-water tank with the correct
dosage of Aqua Rinse. This Thetford toilet uid keeps the
ush water fresh and improves the ushing. Next, ll up
the ush-water tank with clean water (approximately 8
litres) using a jerry can or hose. Close the door and lock
it. Your toilet is now ready to use.
Use fresh (tap) water for the water tank.
8. Electric Ventilator: Open the access door on the outside
of your caravan and remove the waste-holding tank (as
described above).
9. Remove the lter housing cover and if no lter is
present, peel off the sticker lids on the lter and place
the new lter into the lter housing. Place back the cover
of the lter housing.
Clearly read the instructions on the lter on how to
place the lter in the lter housing
10. Turn the bowl to the desired position with the cover
closed and using both hands.
11. To activate the control panel, press the ush-button
once. The control panel display will stay activated for
approximately 5 minutes. Run water into the bowl by
pressing the ush knob brie y or open the valve blade by
turning thehandle anti-clockwise. Your Thetford
toilet is now ready for use.
12. After use, open the valve blade (if still closed) by turning
the handle anti-clockwise. Flush the toilet by pressing
the ush knob for several seconds.
your toilet will be more effective if you pulsate the ush
- 3 -
The ush of
Publicité
