GreenWorks Tools G40GC Manuel D'utilisation page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Using a product
with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
attach the upper hanDle See figure 2
„ Slide the upper handle over the lower handle tubes on
the bucket assembly. Make sure the bolt holes align.
„ Insert a U-bolt from the outside of the handle, passing
through the bolt hole where the upper and lower
handles attach.
„ Once the U-bolt is completely through the handle
assembly, tighten the knob securely.
„ Attach the other side of the handle the same way.
Never operate the garden cart without the proper safety
devices in place and working. Never operate the garden
cart with damaged safety devices. Operation of this
product with damaged or missing parts could result in
serious personal injury.
English (Original instructions)
WarninG
WarninG
WarninG
operation
You are responsible for controlling and steering the
garden cart once it is moving. Grasp the handle securely
before moving. Make sure you are ready to move with
the garden cart before pressing the on-off button and
safety button. Keep a firm grip on the handle once you
are moving.
loaDinG Your GarDen cart
Load your garden cart carefully; disperse the load evenly
across the bucket. The bucket can take up to 220 pounds
(100 kilograms). When moving up and down hills, limit your
load to no more than 220 pounds (100 kilograms). If you
think you are carrying too much, remove some material
from your garden cart.
install BatterY pacK See figure 3
„ Open the battery cover.
„ Align the raised rib inside the panel with the groove on
the battery pack.
„ Ensure the battery pack is secured in place in the
battery compartment.
„ Close the battery cover.
remove BatterY pacK
„ Depress the latch on the back of the battery pack to
release the battery.
„ Remove the battery pack.
When placing battery pack in the tool, be sure raised rib
on battery pack aligns with the groove inside the tool and
latches into place properly. Improper installation of the
battery pack can cause damage to internal components.
locK/unlocK the BraKe See figure 4
„ Step on the brake (12), the brake will be locked, and
the garden cart will stop.
„ Step on the brake again, the brake will be unlocked.
startinG See figure 5
„ To utilize your garden cart set the power switch to the
blue dot position.
15
WarninG
WarninG

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7400007

Table des Matières