Samsung NV51K7770S Serie Manuel D'utilisation page 44

Operating the oven
Before a Hybrid cleaning cycle
Fig. 1
Don't hand
clean the
oven door
gasket.
You may
hand clean
the door.
Fig. 2
NOTE
Remove oven racks and accessories before starting the Hybrid Clean mode.
44 English
NV51K7770S_AA_DG68-00857A-03_EN+MES+CFR.indb 44
• Remove the wire rack, broil pan, broil
pan insert, all cookware, and any
aluminum foil from the oven.
• Wipe up debris from the oven bottom.
(Fig. 1)
• The silver-colored oven racks can be
Hybrid cleaned, but they will darken,
lose their luster, and become harder to
slide.
• Residue on the front frame of the oven
and outside the gasket on the door
will need to be cleaned by hand. Clean
these areas with hot water, soap-filled
steel-wool pads, or cleansers such as
Soft Scrub. Rinse well with clean water
and dry.
• Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for
the gasket to remain intact. If you
notice it becoming worn or frayed, have
it replaced. (Fig. 2)
• Make sure the oven light cover is in
place and the oven light is off.
How to run a hybrid cleaning cycle
1.
4:35 PM
Clean
Self clean Hybrid Clean
Descale Draining
2.
4:35 PM
Clean
Self clean Hybrid Clean
Descale Draining
3.
4:35 PM
Hybrid Clean
Chemical and odor-free oven cleaning
Clean Time
START
1 30
hr min
4.
1 30
hr min
2 30
hr min
CANCEL SET
Turn the Mode knob to Clean. The
display will show 4 cleaning selections.
Tap Hybrid Clean.
Tap the Clean Time area to adjust the
clean time. The clean time adjustment
screen appears. You can set the clean
time to 1hr 30min or 2hr 30min.
Tap SET. The clean time adjustment
screen closes and the clean time
information is displayed on the screen.
2018-08-29 2:18:35