Dixon Bayco BL005 Manuel D'installation & Mode D'emploi page 2

IMPORTANT: To properly operate and maintain your DIXON BAYCO swivel nut adapter,
the following instructions are provided. Please read with care as improper handling or
maintenance may cause a hazardous condition.
CAUTION: Do not modify your DIXON BAYCO swivel nut adapter for any reason. It can
result in a hazardous condition due to operating difficulties or operation malfunction.
Replace: Immediately remove from service any swivel nut adapter that is not performing
satisfactorily.
Installation: The swivel nut adapter is an accessory product, which was designed to
function with the new style ball nozzles (BL062, BL064, BL066, BL068, and BL072)
as an all-weather accessory for stationary tank inlets.
 If spout and spout adapter are present, remove them from the ball nozzle body.
 Remove from inside the ball nozzle body the old o-ring that seals against the
face of the spout adapter.
 Insert the new DIXON BAYCO supplied o-ring into the groove inside the ball-
nozzle body.
 Apply a removable thread locker such as Loctite 242 to the male threads of the
swivel adapter.
 Thread the swivel nut adapter into the ball nozzle body. Use a wrench to
tighten snug; do not over tighten.
Care & Handling: DIXON BAYCO swivel nut adapters are tested at the factory and are in
proper working condition when shipped. Swivel nut adapters are designed to be
tough and to provide long service with reasonable care and handling.
Inspect for Damage: Swivel nut adapters can fail to operate if not properly maintained.
Frequently check for damage, loose or missing parts.
 Inspect the mating o-ring face on the tank inlet to ensure it is contaminant free.
 If the swivel nut adapter leaks, inspect the o-ring and replace if necessary.
DIXON BAYCO WARRANTY:
inside back cover of the latest Dixon Catalogue.
For complete Warranty information, please refer to the
2
090101 R3