Replacing The Battery - Magnasonic CR6 Serie Guide De L'utilisateur

REPLACING THE BATTERY

CR61 - CR62 - CR63 - CR64
When replacing the battery, do not disconnect the power cable from the AC outlet. Current
time and alarm will be lost.
1. Loosen the screw using a small Phillips
Head screwdriver
Note: The screw is designed to be held by the battery panel
and cannot be fully removed.
2. Remove the battery compartment panel
3. Remove and recycle the depleted battery.
Replace with a new 3V, CR2032 Flat Lithium
battery
4. Close the battery compartment and tighten
the screw to secure the battery panel
19