Télécharger Imprimer la page

Battery Operation Tips; Maintenance And Service - inventiv INV BAT 2 Notice Originale D'utilisation

Publicité

Les langues disponibles

Les langues disponibles

BATTERY OPERATION TIPS!

TO OBTAIN THE BEST LIFE FROM THE BATTERY
1.
Never allow the battery to completely discharge before recharging. The battery
pack should be placed on the charger whenever the battery pack is noticeably
running down or the tool no longer performs a task it previously performed.
2.
Avoid conducting short charges. Make sure that the battery is fully charged each
time by allowing the charger to complete its full charging cycle.
3.
After use, allow the battery to pack to cool down for approximately 30 minutes
before attempting to recharge.
4.
To prolong battery life, recommend to charge the battery pack every 6 months,
which over extended periods of time without use.

MAINTENANCE AND SERVICE

Use the following procedures to enable optimum life of battery:
1. Protect the battery pack against moisture and water.
2. When battery pack is not in use, keep it away from other metal objects, lie
paperclips, coins, keys, nails, screws or other small metal objects, that can make
a connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
3.
Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
Have your battery pack serviced by a qualified repair person using only
4.
identical replacement parts. This will ensure that the safety of the battery pack
is maintained.
5.
If you do not use the battery pack for a long time, remember to charge and
discharge the battery pack once every 6 months.
26

Publicité

loading

Ce manuel est également adapté pour:

10inr19/65-2