Description; Specifications - CH CHN70899 Instructions D'utilisation Et Manuel De Pièces

Operating Instructions and Parts Manual
Framing Nailer

Description

This nailer is designed for framing, trusses, sub-floors, sheathing, exterior decks, and
pallet/create assembly. Features include: convenient rear loading magazine which
holds up to 100 nails, tethered no-mar decking tip, quick clear nose, an adjustable
depth of drive mechanism, oil free, electronic low nail indicator, in-line magazine,
bubble level, anti-dry fire, conversion trigger with safety lockout, rubber comfort grip,
swivel plug, and adjustable exhaust.
Figure 1 - CHN70899 Framing Nailer

Specifications

Model CHN70899
Requires: 2.5 Avg SCFM using 16
fasteners per minute at 90 psi
Air Inlet: 1/4 inch NPT
Fastener Size Range:
2 inches to 3-1/2 inches long
u
0.113 inch to 0.131 inch
u
shank diameter
31° to 34°
u
Magazine Capacity:
85 to 100 fasteners per load
Weight: 9 lbs. 4 oz.
Length: 21 inches
Height: 14-1/2 inches
Maximum Pressure:
120 psi
Pressure Range: 70 psi to 120 psi
Batteries: Two (2) AAA
Locate model number and date code on
magazine and / or tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
Retain these numbers for future reference.
www.chpower.com
3