Overview; Application Area; Dimensions - Resol VA32 Manuel Pour Le Technicien Habilité

1

Overview

• Motor-driven 3-port diverter valve
• no flow reduction
• Actuator can be replaced without disassem-
bling the valve
• Easy manual operation
Application area:
The motor-driven 3-port valve VA32 is used in solar
and heating systems, in which smaller parts of the sys-
tems can be controlled separately or single equipment
can be switched on or off.
The valve is equipped with an emergency manual con-
trol, an integrated relay which can be controlled via
an on-off control signal or directly via a potential-free
changeover contact.
characteristics:
Compact size and modern design, insulated actuator
housing. Easy manual operation for initial installation
or emergency operation. Universal electrical connec-
tion by integrated relay.
The signal output of the limit switch in valve position
can be used for control purposes (max. 1 A). The posi-
tion of the ball valve is visible with the white indicator
flag. The actuator can be quickly replaced without di-
sassembling the valve. The DN20 and DN32 versions
offer full bore flow.
technical data
Actuator:
Operating voltage: 230 V~
Power consumption: standby 3 VA otherwise 7,5 VA
Protection type: II (EN60335-1)
Actuator safety class: IP 44 (IEC529)
Limit switch: 5(1)A, 240 VA
connecting cable: 4 x 0.5 mm², L = 2.0 m
regulating angle: 90 °
Actuation time: 18 s / 90 °
torque: 6 Nm (max. 8 Nm)
Ambient temperature: -10 ... +60 °C
Load of the limit switch: 5(1)A, 240 V~
Operating mode: open - closed
Valve:
Max. operating temperature: 0 °C ... 110 °C
Max. operating pressure: 6 bar
housing: forged brass
rotor with axle: brass
Axle sealing: 4 x O-rings, EPDM
Possibility of motor control: UV-3
For reducing axle friction: PA-washer

Dimensions

Dn 20 25
A 3/4" 1"
B 72 90
C 18,5 24
D 116 122
E 54 69
32
1 1/4"
90
24
122
69
11