Phonebook Operations - EnGenius DuraFon 1X Manuel D'instruction

a. Press Menu-9 and enter the two-digit base ID to
enter the System mode.
b. Press 1 to enter Tone selection
c. You can adjust the dial mode between Tone and
Pulse. The default setting is Tone.
d. The default setting is Tone.
2. Flash Time
a. Press Menu-9 and enter the two-digit base ID to
enter the System mode.
b. Press 2 to enter Flash selection
c. You can adjust the flash time from 100ms to 900
ms (9 levels to choose from.) For example, press
"2" if the desired flash time is 200ms. You will see
"DONE" once you finish the setting.
d. The default setting is 600ms.
Notes: If the base station is adjunct to a PBX system, it is
recommended to adjust the flash time of DuraFon 1X to match
the PBX spec.
3. Xfter PBX
a. This function is useful if the base station attached
to the PBX system through either the analog port
or the Digital Adaptor. Press Menu-9 and enter the
two-digit base ID to enter the System mode.
b. Press 3 to enter Xfter PBX setting mode
c. Use or scrolling key to switch between ON
and OFF. The default setting is OFF.
d. Select ON and press key
SAVE
e. You can key in the specific "call transfer" feature
code and press OK to confirm the setting. For
example, if your PBX is N brand, you need to key
in "Flash"+"*"+"70" as the call transfer code.
f. You will see a "DONE" confirmation.
Notes: Since the base station is adjunct to a PBX system, you need
to adjust the flash time of DuraFon 1X to match the PBX spec and
then program the "call transfer" code.
4. Set next Handset ID to be assigned
a. This function is useful if you want to assign a
11
Main Menu:
8. Call Manager
9. System
11
System:
1. Dial Mode
2. Flash Time
11
Flash(msec):
1. 100
2. 200
11
Done
11
System:
2. Flash Time
3. Xfter PBX
11
Xfer PBX:
On
SAVE
11
Xfer Code:
Flash*70
O K DELETE
11
System:
3. Xfter PBX
4. Assign Next
~35~
designed handset ID to a specific handset. Press
Menu-9 and enter the two-digit base ID to enter
the administration mode.
b. Press 4 and then enter two digits ID number to be
assigned. You will see "Saving Configuration"
and a Done confirmation.

Phonebook Operations

1. You can store up to 30 entries in the phonebook.
Each entry can contain a phone number or handset
ID (up to 28 digits) and a name (up to14 characters).
2. To access phonebook, press menu follow by "2" or
or scrolling key when handset in standby mode.
3. To add a new entry:
a. Press ADD soft key.
b. Enter a phone number when LCD prompts
"Number?" Use DELETE soft key to delete the
last digit entered. Press SAVE
c. You will then be prompted to enter a name for the
phone number just entered.
(1) Press SAVE key to enter a phone number without
a name. All records without naming will be placed
on top of the list, in the order they are entered.
(2) To enter the name, press the corresponding keypad number one or
more times according to the order of the character on the key.
(3) Use DELETE soft key to delete the last character entered. When
completed, press SAVE soft key to confirm your selection.
11
Please enter
Ext. #:**
CANCEL
11
Main Menu:
1. KeyGuard
2. PhoneBook
11
ADD OPTION
11
Number?
when completed.
SAVE DELETE
11
Name?
Caps = *
SAVE DELETE
~36~