Samson Expedition Express+ Mode D'emploi page 6

Express+ Controls and Connections
1. MIC/LINE Input - Use this XLR
- 1/4" combo input to connect
microphones or a line devices.
2. XPD WIRELESS Input - Connect a
Samson XPD digital wireless USB
receiver to this input. The wireless
receiver gets its power from the
Express+, so no additional power
supply is needed.
3. MIC/LINE VOLUME - Used to
control the level of the MIC/LINE
and XPD Wireless inputs.
4. LINE IN - 1/4" input used to
connect line level devices.
5. LINE IN VOLUME - Used to control
the level of the 1/4" Line input.
6. AUX INPUT - Connect a line level
device using a 1/8" (3.5mm) audio
cable.
7. Pairing Button - Press this button
to enable discoverable mode to
pair with a Bluetooth audio device.
8. Pairing Indicator - Displays the
Bluetooth status of the Expedition
Express+ system.
9. AUX / BLUETOOTH VOLUME - Used
to control the level of the 1/8" Aux
and Bluetooth audio.
10. BASS EQ - Controls the low
frequency tone of the entire
system.
11. TREBLE EQ - Controls the high frequency tone of the entire system.
12. POWER Switch - Switches on the main power.
13. POWER Indicator - Lights green when the power switch is in the ON position.
14. Battery Level Indicator - Displays the status of the battery charge level. Indicator lights
red while charging, and turns green when the battery is fully charged.
15. DC INPUT - Connect the supplied power adapter here.
6
5
3
4
1
2
13
15
14
9
8
7
6
10
11
12