Flight Control - AKASO A300 Drone Mode D'emploi

FLIGHT CONTROL

1. Take off
Option 1:
① Put the drone in flat floor, push both rockers to right down at 45° angle.
② Calibration the drone before take off, the indicator light of drone will be flash, and
stop flashing once completed.
③ Push up the left rocker and start to take off.
1
Option 2：
① Put the drone in flat floor, push both rockers to right down at 45° angle.
② Calibration the drone before take off, the indicator light of drone will be flash, and
stop flashing once completed.
③ Press the "up" button as below at the top left of the remote controller, automatically lift
the drone.
STOP
Press 3s to
emergency landing
1
6
2
Press 3s to
one-button return
2
2. Landing Methods
Option 1：
① Slowly push down the left rocker until the drone lands.
② Keep the rocker in the lowest position for 3 seconds.
③ The motor stops and the plane lands successfully.
Option 1
Option 2:
Press the "down" button at the left top of the remote, and the drone will descend
automatically.
3. Emergency Landing
When the drone encountered obstacles or emergency, long press the emergency landing
button at the left top for 3 seconds ,the drone can be emergency landing.
STOP
Press 3s to
Press 3s to
emergency landing
one-button return
STOP
Press 3s to
Press 3s to
emergency landing one-button return
Option 2
7