Publicité
Les langues disponibles
Les langues disponibles
OPERATION
1.
Connect the phone plug cable; one side to the audio output
of the receiver, the other side to a mic input of your mixer.
2.
Pull the telescope antenna to the longest vertical extent, to
enhance sensitivity for receiving the microphone signal.
3.
Press the power switch on, the power indicator will light.
4.
When the microphone is transmitting the signal, the red light
of the RF signal wil light to indicate that the mic is operating.
5.
The squelch level is adjustable by the squelch adjustment at
the back of the unit, adjust the output level to prevent
external noise. (Setting the squelch too high will reduce the
range of the system).
6.
When the receiver is not used, revolve the volume switch to
the minimum and turn the power off.
MR-S06 + MX-V30
6
Publicité
