Overload Protection; Troubleshooting; Warranty - axhess 2.950.062 Manuel

GB
This converter works fully automatically and can also be switched on and off
for an extended period of time. Connected to a 12V DC connector when the
device is connected to a 230V power supply.
It has protective mechanisms:

Overload protection

The device switches off automatically when the max. Connection load is per-
manently exceeded.hort circuit protection.
The converter is protected against short circuit. Turns on again as soon as the
short circuit is removed.
Short circuit protection
The converter is protected against short circuit. Turns on again as soon as the
short circuit is removed.
4 Equipment features
1. Housing made of fire-retardant plastic
2. 12V connection devices up to 6A / 72W
Art.No .: 2.950.062 Power consumption can be operated.
For art. No .: 2.950.063 10A / 120W
3. LED indicator Power ON,
4. Short circuit protection.
5. Convenient 12V socket for holding 12V connector.
6. Overload protection
5 Connection / operation in single steps:
Das Gerät so platzieren, dass es nicht umfallen oder stürzen kann.
Status: details:
Place the device so that Connect to 12V power source Connect the plug of
it can not fall or fall.
the unit to a 230V socket. Ro LED Power ON is on.
Connect to the 12V The 12V connector of the 12V connector to the
connector 12V socket of the Converter,
axhess GmbH & Co. KG, Industriestrasse 11, 56598 Rheinbrohl, www.axhess.de
14
6 Care and cleaning
Periodically check the technical safety of the transducer, e.g.
Damage to power cord or cabinet. Before cleaning the appliance, make sure
that the appliance is not connected to a power source.
Always wipe the unit with a dry cloth. Do not use liquids or chemical cleaners.
Never immerse the appliance in liquids. Never allow liquids to run over the unit.

7 Troubleshooting

With this converter you have purchased a product, which was built according
to the state of the art and operationally safe. However, problems or disturban-
ces may occur.
Therefore, we would like to describe how you can solve possible problems:
Troubleshooting solution
No function Is the connector connected to the 12V power source.
- Is the power source activated
- Check the power source
Any other measures than described above must be carried out by an
authorized specialist.

8 Warranty

We refer to our warranty conditions, this can be found at www.axhess.de
warranty conditions. The warranty period is 24 months from the date of
purchase.
15
GB