Scope Of Delivery; Intended Use - axhess 2.950.062 Manuel

GB
Ensure that the unit is correctly and operated as intended.
Operate the device solely for its intended use. (See 3.)
Ensure that the cables are not squeezed or damaged by sharp edges when
installing the product.
Do not place or operate the converter near inflammable or inflammable
materials, or explosive environments, e.g. Gasoline, thinner, oil, gas or other
solid, easily flammable substances.
Do not expose the converter to high temperatures, strong vibration, or
moisture.
Always ensure a safe placement of the device! The converter must be placed
so safely that it can not fall or overturn.
Devices that are operated at mains voltage are not intended for use in chil-
dren's hands. Therefore, be very careful in the presence of children. Keep
children away from this unit.
In commercial facilities, the accident prevention regulations of the relevant
professional association must be observed.
In schools, training institutions, hobby and self-help workshops,
Operating this transducer by trained personnel.
The use of accessories or attachments, which are not recommended by the
manufacturer can lead to damage to the device and / or to personal injury!
In addition, the warranty expires!
To avoid damage to the cables and / or the 12V output line / socket, never
pull the cable, always disconnect the power connection by means of a plug.
The 230V supply line and the 12V output line must be in perfect condition. If
the cables are damaged, do not use the appliance. Have the device repaired
first by qualified personnel.
axhess GmbH & Co. KG, Industriestrasse 11, 56598 Rheinbrohl, www.axhess.de
12
No flammable objects, e.g. Place the candles on the appliance. Place no
objects filled with liquids, e.g. water container, beverage holder on the
appliance or in the vicinity.

2 Scope of delivery

1 230V to 12V converter
1 Operating instructions.
1 Fully recyclable sales packaging

3 Intended use

These converters are used to convert 230V household voltage AC to 12V DC.
They are designed for the operation of 12V connecting devices up to a max.
power rating of 6A / 72 W Product No .: 2.950.062, or 10A / 120W with Art.No.:
2.950.063. Only 12V DC connections may be used. Other devices must not be
connected.
The respective product is only approved for connection to a protective con-
tact socket with 230V 50Hz alternating voltage. Use is only permitted in dry
rooms and dry ambient conditions. Avoid contact with moisture, such as fog,
rain, snow, condensation and the like.
Any use other than described above will damage this product, as well as
hazards such as short circuit, fire, electric shock, etc..
The entire product must not be altered or altered, the device housing must
not be opened!
Note these safety instructions!
4 Technical features / equipment
The device can be operated anywhere where a 230V AC connection (230V
AC) is available. The converter can be operated as a table or wall mounting.
Always ensure adequate, good ventilation. The device input voltage corre-
sponds to the household voltage (230V AC 50Hz).
Please always pay attention to the performance of the device as well as the
connected 12V devices. If not indicated on the connector, calculate the power
consumption in watts as follows: 12V x A = Watt
13
GB